ACTi ACM-3300 Bedienungsanleitung PDF herunterladen (Seite 37)

changes.

Night to Day

Threshold

This value controls the level of light where camera

switches into Day mode. Increasing it will make camera

switch to Day mode at a darker illumination level.

Night To Day

Timer

The camera will only switch day/night status if the

illumination level stays either above or below the boundary

for this much time. This is to prevent a temporary

brightness change from triggering unnecessary day/night

changes.

Current Exposure

Level

Clicking this button will refresh the illumination level

reading from the camera sensor. The larger the number,

the darker the environment.

IR LED Control

IR LED may be configured as AUTO or Disabled here. If it

is set as AUTO, LED will turn on in night mode and turn off

in day mode. If set to Disabled, LED will stay off when

camera switches into night mode.

STEP2: Click the [Apply] button of each section to confirm the

settings or click the [Reset] button to re-enter the parameters.

NOTE: This section is available for ACM-5811 / ACM-7511 only.

Other CCD Models may not have Camera Setup section.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 68 69

Keine Kommentare

ACTi ACM-3300 Bedienungsanleitung Seite 37