ACTi ACM-3300 Bedienungsanleitung PDF herunterladen (Seite 23)

 STEP2: Configure these settings with reference to the table below. If

you are still unsure what to set, contact your system administrator.

■WAN Setting

Parameters

Description

Dynamic IP

address

Click this to enable IP device’s DHCP function.

It will acquire its WAN port IP address from a DHCP server

within the same network. (You must have a DHCP server in

order to enable this function.)

Use Host

Name

Static IP

address

Click this to manually enter the IP device WAN port IP

address.

IP address: Enter the WAN port IP address.

Subnet mask: Enter the subnet mask of WAN port. If

IP address is changed, adjust the subnet mask

accordingly.

ISP gateway: Enter the IP address of the gateway

(the router).

PPPoE

Click this when you connect IP device directly to the xDSL

modem.

User name: Enter the user name of your xDSL

account.

Password: Enter the password of your xDSL

account.

Note: You have to click the [Save Reboot] after you click the

[Apply button] to let this IP device start xDSL connections.

■DNS server Setting

Parameters

Description

Primary DNS

server

Defines the IP address of the primary DNS server. This is used

for identifying this computer by name instead of IP address.

Secondary DNS

server

The IP address of the secondary DNS server. It will be used

once the primary DNS server fails.

■DDNS server Setting

Parameters

Description

DDNS type

Click this to enable IP device’s DDNS function.

DDNS function enables user to connect to this IP device by

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 68 69

Kommentare zu diesen Handbüchern

Keine Kommentare

ACTi ACM-3300 Bedienungsanleitung Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras ACTi ACM-3300