ACTi E66 Installationsanleitung PDF herunterladen (Seite 11)

E-11

(RS-422)

Pin No. Signal Signal Name Direction

1 RXA Receive Data (+) Input

2 RXB Receive Data (-) Input

3 TXA Send Data (+) Output

4 NC No Connection -

5 GND Ground -

6 NC No Connection -

7 TXB Send Data (-) Output

8 NC No Connection -

9 NC No Connection -

FG FG Frame Ground -

(RS-485)

Pin No. Signal Signal Name Direction

1 DATE+ Send/Receive Data (+) In/Output

2 DATE- Send/Receive Data (-) In/Output

3 NC No Connection -

4 NC No Connection -

5 GND Ground -

6 NC No Connection -

7 NC No Connection -

8 NC No Connection -

9 NC No Connection -

FG FG Frame Ground -

• Be sure to connect pin number 5 (SG) of COM1 to the host unit's

Signal Ground terminal.

• Be sure to confirm what settings will be used by the other

device and set the dip switches accordingly. Failure to do so can

result in a unit malfunction or damage.

• Whenever changing the PS-A switches, be sure to first turn the

PS-A's power supply OFF. Failure to do so can cause a PS-A

malfunction.

• Connect the FG terminal line to the connector cover's PS-A con-

nector attachment screw.

• FG and SG terminals are internally connected in the PS-A. When

connecting to another device, be sure to create an SG shorting

loop in your system.

Use inch type (#4-40UNC) threads to hold the cable's set (attachment) screws

in place.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Keine Kommentare

ACTi E66 Installationsanleitung Seite 11