ACTi E33 Handbuch PDF herunterladen (Seite 18)

www.acti.com

Hardware Manual

3. Secure the clamping nut to the body.

NOTE: Make sure the clamping nut is tight to avoid possible water leak.

Step 4: Connect the Ethernet Cable

1. Connect the Ethernet cable to the Ethernet port inside the camera.

2. When done, close the back cover by tightening the three (3) screws.

NOTE: Make sure the rubber ring on the cover is secured and the screws are

completely tightened to avoid possible water leak.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 33 34

Keine Kommentare

ACTi E33 Handbuch Seite 18