ACTi ACM-4001 Bedienungsanleitung PDF herunterladen (Seite 85)

www.acti.com

* Latest product information: www.acti.com/product/

* Accessory information: www.acti.com/accessory/

TCD-2500

• Device

Device Type Video Encoder

Number of Channels 1

• PTZ

Protocol

Pelco-D, Pelco-P V1 and V2, Dynacolor, Sony VISCA, American Dynamics

• Video

Compression H.264, MPEG-4 SP, MJPEG

Maximum Frame Rate vs.

Resolution

30 fps at 720 x 480 (Full D1, NTSC); 25 fps at 720 x 576 (Full D1, PAL)

30 fps at 352 x 240 (CIF, NTSC); 25 fps at 352 x 288 (CIF, PAL)

30 fps at 160 x 112 (QCIF, NTSC); 25 fps at 176 x 144 (QCIF, PAL)

Multi-Streaming Simultaneous dual streams based on two congurations

Bit Rate 28 Kbps - 6 Mbps (per stream)

Bit Rate Mode Constant, Variable

Image Enhancement

Wide dynamic range; Brightness; Saturation; Contrast; Sharpness; Digital noise reduction; Black level extension;

3D deinterlacing; Skin tone enhancement

Privacy Mask 4 congurable regions

Text Overlay User dened text on video

• Audio

Compression 8 kHz, Mono, PCM, 16 bit encoding

Audio-In 3.5 mm Phone Jack

Audio-Out 3.5 mm Phone Jack

• Network

Protocol & Service

TCP, UDP, HTTP, HTTPS, DHCP, PPPoE, RTP, RTSP, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP,

FTP, UPnP, SNMP, Bonjour

Ethernet Port 1, Ethernet (10/100 Base-T), RJ-45 connector

Security IP address ltering; HTTPS encryption; Password protected user levels

• Alarm

Alarm Trigger Video motion detection (3 regions); External device through digital input

Alarm Response

Notify control center; Go to PTZ preset point or preset tour; Change camera settings;

Command other devices; E-mail notication with snapshots; Upload video, snapshot to FTP server;

Activate external device through digital output

• Interface

Analog Video Input 1, CVBS, 1.0Vp-p with 75Ω BNC connector

Analog Video Output 1, CVBS, 1.0Vp-p with 75Ω BNC connector

Digital Input 2, terminal block

Digital Output 1, terminal block

Serial Port RS-485, RS-422, RS-232, terminal block

• General

Power Source /

Consumption

DC 12V ±10% / 4.7 W

Weight 870 g (1.92 lb)

Dimensions (W x H x D) 144 mm x 50 mm x 139.5 mm (5.67” x 1.97” x 5.49”)

Operating Temperature -10 °C ~ 50 °C (14 °F ~ 122 °F)

Operating Humidity 10% ~ 85% RH

Approvals Video Encoder: CE, FCC; Adapter: CE, TUV-GS, UL, RCM, CCC

• Integration

Unied Solution Fully compatible with ACTi software

ISV Integration Software Development Kit (SDK) available

Firmware Access Browser Microsoft Internet Explorer 6.0 or newer

PRODUCT SPECIFICATION

TCD-2500

Video Encoder

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 120 121

Kommentare zu diesen Handbüchern

Keine Kommentare

ACTi ACM-4001 Bedienungsanleitung Seite 85

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras ACTi ACM-4001