ACTi TCM-7811 Bedienungsanleitung PDF herunterladen (Seite 24)

www.acti.com

TCM-7811 Hardware User’s Manual

3. Accessing Camera

If you have DHCP server / router

Many network server / routers are able to automatically provide IP addresses through DHCP. If you

are using such a network, just plug in your computer and IP Camera into the network and your IP

device will acquire network address by itself. Find and access the device with our IP Utility program.

You may download it at:

http://www.acti.com/product/detail/Software/ACTi_Utility_Suite

If you do

NOT

have DHCP server / router

1. Configure your PC to use the same subnet by changing your PC’s IP address to the

subnet with prefix 192.168.0.XXX. The last number should be anything from 1 to 254

except 100 and other occupied IP addresses. Subnet mask should be 255.555.255.0.

2. The default IP used by this device is 192.168.0.100. Please make sure your PC is

NOT using this address and that no two equipments use the same IP address in the

network.

3. Change your IP address by going to Control Panel ->Manage Network Connections ->

Right click on the connection to change -> Option -> TCP/IP IPv4 Properties.

Please set the settings as below.



 IP address: 192.168. 0.xxx

 Subnet mask: 255.255.255.0

(NOTE: xxx should be a number

from 1 to 254 except 100, which is

used by the IP device. Please also

make sure that no two equipments

use the same IP address in the

same network..)

1 2 ... 19 20 21 22 23 24 25 26 27

Keine Kommentare

ACTi TCM-7811 Bedienungsanleitung Seite 24