ACTi CAM-5100M Bedienungsanleitung PDF herunterladen (Seite 14)

2-8

6. PPPoE : Point-to-Point Protocol over Ethernet (PPPoE) merges PPP,

which is usually used for dial-up connections (e.g. ADSL, Cable

Modem).

7. User Name : Enter the user name for the PPPoE connection.

8. Password : Enter the password for the PPPoE connection.

9. Primary DNS Server : Set the primary DNS server IP address.

10. Secondary DNS Server : Set the secondary DNS server IP address.

11. DDNS Type : Set Disable or Enable

12. Service ISP : Pick one of ISP provider.

13. Host Name : Enter the host name (e.g. acti.dyndns.org)

14. User Name : Enter the user name of xxxx.dyndns.org

15. Password : Enter the password of xxxx.dyndns.org

16. : Click this button to apply the setting of this section

17. : Click this button to reset

NOTE: Check with your MIS department, if Client PC and SED-3200 are

setting in different VLANs, please connect to WAN port.

NOTE: Save Reboot is necessary to execute for keeping this configuration

after reboot next time.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Keine Kommentare

ACTi CAM-5100M Bedienungsanleitung Seite 14