ACTi E97 Handbuch PDF herunterladen (Seite 19)

www.acti.com

Hardware Manual

Using the Default Camera IP Address

If there is no DHCP server in the given network, the user may have to assign the IP addresses

to both PC and camera manually to make sure they are in the same network segment.

When the camera is plugged into network and it does not detect any DHCP services, it will

automatically assign itself a default IP:

192.168.0.100

Whereas the default port number would be 80. In order to access that camera, the IP address

of the PC has to be configured to match the network segment of the camera.

Manually adjust the IP address of the PC:

In the following example, based on Windows 7, we will configure the IP address to

192.168.0.99 and set Subnet Mask to 255.255.255.0 by using the steps below:

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Keine Kommentare

Modelle	Dokumententyp
EL355	Bedienungshandbuch ESPRIT EL355 Owner`s manual, 21 Seiten
EL555	Bedienungshandbuch ESPRIT EL555 Owner`s manual, 26 Seiten

ACTi E97 Handbuch Seite 19