ACTi E413 Handbuch PDF herunterladen (Seite 11)

www.acti.com

Hardware Manual

c. Connect the cables, see Step 3: Waterproof and Connect the Cable(s) on page 13.

d. Push the cable(s) into the cable hole of the surface, then proceed to Step 2: Mount

the Camera below.

If the camera cable will be routed along the surface, continue with the next step.

Step 2: Mount the Camera

NOTE: For simplicity of documentation, the succeding illustrations show the camera as

mounted on the ceiling. Same procedures apply for mounting the camera on the wall.

1. Route the cable:

 If the cable will go through a hole on the surface, push the cable(s) through the

hole on the surface.

 If the cable will go along the surface, route the cable through the gap on the

bracket.

2. Tighten the set screw on the bracket plate to fixed its position.

3. Attach the camera to the surface using the three (3) supplied screws.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Keine Kommentare

ACTi E413 Handbuch Seite 11