ACTi B52 Bedienerhandbuch PDF herunterladen (Seite 2)

INSIDE THIS INSTRUCTION MANUAL

Important Safety Instructions / Specifications..........................................................2

Important Information...................................................................................................3

Amplifier Descriptions..................................................................................................4

Set-up & Warranty Information....................................................................................5-7

Contact Information......................................................................................................8

1) Read these instructions.

2) Follow all instructions

3) Keep these instructions

4) Heed all warnings

Do not use the MATRIX 1000 near water. Be

extra cautious when moving the system during

rain or while transporting the system over wet

surfaces as water might splash onto the amplifier.

6) Clean only with dry cloth.

Do not block any ventilation openings. Install

in accordance with manufacturer’s instructions.

8) Do not install near heat sources such as

radiators, stoves or other devices that may

produce heat.

9) Do not defeat the safety purpose of the

polarization or grounding-type plug. A

polarized plug has two blades with one wider

than the other. A grounding-type plug has two

blades and a third grounding prong. The wide

blade or the third prong is provided for your

safety. If the provided plug does not fit your

outlet, consult an electrician for replacement

of the obsolete outlet.

10)

Protect the power cord from being walked on

or pinched, particularly at the plug and the

point where it exits the MATRIX 1000 amplifier.

11) Only use attachments / accessories specified

by B-52 Pro-Audio.

12) Use caution when transporting the system to

avoid injury from tip-over.

13) Unplug the MATRIX 1000 during lightning

storms and when not in use.

14) Refer all servicing to qualified to personnel.

Servicing is required when the MATRIX 1000

has been damaged in any way such as when

power-cord or plug is damaged, liquid has

been spilled into the cabinets, the unit has

been exposed to moisture or rain, does not

operate normally, or has been dropped.

15)

To reduce the risk of fire or electric shock, do

not expose the MATRIX 1000 to rain or moisture.

16) The MATRIX 1000 is not intended for outdoor

fixed installations or in high moisture areas.

Moisture can damage the speakers and can

use cause corrosion of electrical contacts.

Keep speakers out of extended or intense

direct sunlight. The subwoofer spider and

surround will prematurely dry out and finished

surfaces may fade and be damaged by long-

term exposure to intense ultra-violent light.

IMPORTANT SAFETY INFORMATION

CAUTIONCAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

HEED ALL WARNINGS

WARNING: To reduce the risk or fire or

electrical shock do not expose this

equipment to rain or moisture.

Note: Specifications are subject to change without notice

CAUTION: Connect the power cable only after you have absolutely made

sure that the local mains voltage matches the voltage specified on the

device. If you connect to the wrong voltage, you may destroy the elec-

tronic components of the MATRIX 1000 system.

See page 4 for a complete description of factory-default voltage settings.

AMPLIFIER SPECIFICATIONS:

Subwoofer Power Output: 400 W / 8 Ohms @ 1% THD

10” Two-way Power Output: 150 W / 4 Ohms @ 1% THD

Line in: XLR Female

Parallel out: XLR Male

Input Impedance: 48 k Ohms

Speaker Out: Speakon NL4 Style Connector

Power Requirement: 115V<>50/60Hz<>10A

230V<>50/60Hz<>6A

ACTIVE CROSSOVER:

Crossover Frequency: 120 Hz; 24 dB/ Octave

SUBWOOFER:

Speaker: 1 x 15” Custom Built B-52 Subwoofer

Nominal Impedance: 8 Ohms

Subwoofer Freq. Response: 40 Hz – 120 Hz +/- 3dB

Sound Pressure Level (1w/1m): 102 dB (half space)

Max. SPL: 127 dB @10% THD

Weight: 115 lbs

Dimensions (Transport): 28” (H) x 19” (W) x 23” (D)

10” TWO-WAY SPEAKERS:

Speaker Input: Speakon style connector

(pin 1+ = +, pin 1- = -)

LF/MF Woofer: 1 x 10” Custom Built B-52 Transducer

HF Driver: 1 x 3/4” Titanium Diaphragm on CD Horn

HF Dispersion: 90

x 40

Nominal Impedance: 4 Ohms

Active Freq. Response: 120 – 19K Hz +/- 3dB

Crossover Frequency (passive):2.5 kHz; 12 dB / Octave

Sound Pressure Level (1w/1m): 101 dB (half space)

Max. SPL: 124 dB @10% THD

Weight: 25 lbs

Dimensions (Upright): 19” (H) x 12” (W) x 11” (D)

COMPLETE SYSTEM:

Weight: 165 lbs

Dimensions (Transport): 39” (H) x 19” (W) x 23” (D)

1 2 3 4 5 6 7 8

Kommentare zu diesen Handbüchern

Keine Kommentare

ACTi B52 Bedienerhandbuch Seite 2

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras ACTi B52