ACTi ACM-8201 Bedienungsanleitung PDF herunterladen (Seite 10)

1-6

1.4 Physical Description

1. Power Input

If your power input is DC12V.

2. Ethernet Port

The IP device connects to the Ethernet via a standard RJ45

connector. Supporting NWAY, this IP device can auto detect the

speed of local network segment (10Base-T/100Base-TX

Ethernet).

3. Reset Button

Step 1: Switch off IP device by disconnecting the power cable

Step 2: Press and continue to hold the Reset Button. Reconnect the

power cable while continuing to hold the reset button.

Step 3: Keep holding the reset button depressed around 6 seconds,

release the reset button. The unit will start up with factory default

settings.

4. Audio Output

The IP device supports audio output with earphone jack

5. The I/O Terminal Connector

Used in applications for e.g. motion detection, event triggering,

time lapse recording, alarm notifications, etc., the I/O terminal

connector provides the interface to:

•1 transistor output - For connecting external devices such as relays

1 2 ... 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

ACTi ACM-8201 Bedienungsanleitung Seite 10