ACTi ACM-4201 Bedienungsanleitung PDF herunterladen (Seite 9)

www.acti.com

ACM-4201 Hardware User’s Manual

4) Audio Output

The IP device supports audio output with earphone jack

5) Ethernet Port

The IP device connects to the Ethernet via a standard RJ45 connector. Supporting NWAY, this

IP device can auto detect the speed of local network segment (10Base-T/100Base-TX

Ethernet).

6) DV 12V Power Input

Connect the power adaptor here if your power input is DC12V.

7) Digital Input / Output *

Used in applications like motion detection, event triggering, time lapse recording, alarm

notifications, etc., the I/O terminal connector provides the interface to:

•1 Digital Input - An alarm input for connecting devices that can toggle between an open and

closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. The device

will detect the change in digital input and transmit the signal to video surveillance servers.

Connect pins 1 and 3 to your Digital Input device.

•1 transistor output - For connecting external devices such as relays and LEDs. Connected

devices can be activated by Output buttons on the Live View page or through video

management software. Connect pins 2 and 4 to your Digital Output device.

The I/O terminal pins are numbered left to right

Pin 1

GND

Ground

Description

Pin 2

12V (Digital

Output

Power Side)

This pin provides DC 12V power which can be

connected to Pin 4 via DO devices to complete a

DO circuit with a maximum current of 100mA.

Voltage: 12V DC,

Max: 1.2W

Pin 3

Digital Input

Connect to GND to activate, or leave floating (or

unconnected) to deactivate.

Must not be exposed to

voltages greater than

30V DC.

Pin 4

Transistor

Output

Uses an open-collector NPN transistor switch

that connects to the internal ground to complete

the circuit with Pin 2. If used with an external

relay, a diode must be connected in parallel with

the load for protection against transient voltages.

Max load = <100mA

Max voltage = 24V DC

(to the transistor)

* Available only for device versions with enhancements

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

ACTi ACM-4201 Bedienungsanleitung Seite 9

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitskameras ACTi ACM-4201