Acti E213 Bedienungsanleitung PDF herunterladen (Seite 9)

www.acti.com

Hardware Manual

Physical Description

Item

Description

Serial Port

This port connects to serial devices via RS-485 or

RS-422 protocols. Use the supplied serial port

terminal block to connect the wires from the serial

device to the camera.

See How to Connect a Serial Device on page 18

for connection details.

Ethernet Port

Connects to a network using an Ethernet cable.

Memory Card Slot

Insert a memory card into this slot for local

recording purposes. See How to Install / Remove

the Memory Card on page 25 for more

information.

NOTE: Supports microSDHC and microSDXC

cards.

Reset Button

Restores the factory default settings of the

camera. Resetting the camera must be done while

the power is on. Using a pointed object, such as a

paper clip, press and hold the Reset Button for at

least 5 seconds or until the Power LED goes off .

Power LED

The Power LED turns on when the camera is

powered on and the system is running.

Digital Input / Output

(DI/DO) and Audio

Input / Output

This connector connects to digital input or output

devices, such as an alarm trigger, panic button,

etc., as well as audio input and output devices,

such as microphones and speakers. Digital Input

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Keine Kommentare

Acti E213 Bedienungsanleitung Seite 9