ACTi ENR-1000 Installationsanleitung PDF herunterladen (Seite 19)

www.acti.com

ENR-1000 System Administrator’s Manual

LAN 2 Port

LAN2 port is a typical Ethernet port. You will have to use this port to connect with a different

network segment when your system requires (1) the connection with a remote PC client or

network camera, (2) the use of event-triggered Email service via external SMTP server (3)

the use of date/time synchronization with external NTP server.

By default, once connecting to a network, it will first try to get an IP address assigned by your

network router with DHCP server. If your network does not assign IP address automatically,

then LAN2 port will assume IP address 192.168.1.10. Please note that every time you

connect a network via LAN2, you have to REBOOT ENR to refresh the IP addresses.

Connection Setting Example 2

Below diagram displays an example connection setting using LAN1 + LAN2 to connect

networks cameras within different network segments.

In this setting, ENR with three cameras are within the same network segment, while there is

another camera locating in another network. In addition, this system requires the connection

with an external SMTP server and a remote client.

You may check and modify the network configurations by going to Live View Menu  Select

“Setup Menu”  click System Settings tab, and select Network.( for detailed configuration

instructions, please refer to Network Settings on page 36).

LAN 1: 192.168.0.10

DHCP

(ex:172.16.26.101)

LAN 2: DHCP

(ex:172.16.26.100)

192.168.0.101 ~ 192.168.0.103

SMTP Server

Remote PC Client

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 54 55

Keine Kommentare

ACTi ENR-1000 Installationsanleitung Seite 19