ACTi E45 Handbuch

Bullet Camera Hardware Manual E44, E45, E46 Ver. 2013/06/14

www.acti.com Hardware Manual 10 5. Connect the RJ-45 male-type connector of the camera to the 2-sided female type connector (includ

www.acti.com Hardware Manual 11 Waterproof Cable Installation There are two ways to waterproof the cable installation:  Waterproof

www.acti.com Hardware Manual 12 Waterproof without Conduit 1. Prepare the Waterproof without Conduit cable accessories. Detach the

www.acti.com Hardware Manual 13 4. Insert the main body. 5. Do the same procedures on the Ethernet cable on the network side. 6.

www.acti.com Hardware Manual 14 7. On the Ethernet cable on the camera side, attach the rubber seal to the main body. 8. Att

www.acti.com Hardware Manual 15 10. Do the same procedures on the network cable side. Below is a complete cable connection. NOTES

www.acti.com Hardware Manual 16 Waterproof with Conduit 1. Prepare the Waterproof with Conduit cable accessories (included in the w

www.acti.com Hardware Manual 17 3. Insert the clamping nut through the Ethernet cable of the camera. 4. Insert the rubber seal.

www.acti.com Hardware Manual 18 6. On the network side, insert the Ethernet cable through the flex conduit. 7. Insert the clampin

www.acti.com Hardware Manual 19 9. Insert the body through the Ethernet cable and then the converter. 10. Insert the washe

www.acti.com Hardware Manual 2 Table of Contents Precautions 3 Safety Instructions ...

www.acti.com Hardware Manual 20 12. Connect the parts of the network side cable to the 2-sided female type connector. 13. On

www.acti.com Hardware Manual 21 15. Attach the clamping nut to the main body. The waterproof cable connection is complete.

www.acti.com Hardware Manual 22 Basic Connections To connect the camera, you need to prepare the following:  Power over Ethernet (

www.acti.com Hardware Manual 23 Connecting Multiple Cameras To connect multiple cameras, use a PoE switch.

www.acti.com Hardware Manual 24 Accessing the Camera Configure the IP Addresses In order to be able to communicate with the camera f

www.acti.com Hardware Manual 25 By double-clicking with the left mouse on the camera model, it is possible to automatically laun

www.acti.com Hardware Manual 26 Using the Default Camera IP Address If there is no DHCP server in the given network, the user may ha

www.acti.com Hardware Manual 27 Manually adjust the IP addresses of multiple cameras: If there are more than 1 camera to be used in

www.acti.com Hardware Manual 28 Access the Camera Now that the camera and the PC are both having their unique IP addresses and are u

www.acti.com Hardware Manual 29 Assuming that the camera’s IP address is 192.168.0.100, you can access it by opening the Web browse

www.acti.com Hardware Manual 3 Precautions Read these instructions You should read all the safety and operating instructions before

www.acti.com Hardware Manual 30 Other Adjustments and Accessories Adjust the Viewing Angle 1. Open the front cover. 2. Based o

www.acti.com Hardware Manual 31 Attach the Sunshield The use of sunshield is optional if the camera will be installed indoors. Howev

www.acti.com Hardware Manual 4 Federal Communications Commission Statement This equipment has been tested and found to comply with t

www.acti.com Hardware Manual 5 Safety Instructions Cleaning Disconnect this video product from the power supply before cleaning. At

www.acti.com Hardware Manual 6 Introduction List of Models This hardware manual contains the following models: E44 2MP Bullet with

www.acti.com Hardware Manual 7 Package Contents Bullet Camera Sunshield Mounting Screw Kit Sunshield Screw Kit Waterproof Kit D

www.acti.com Hardware Manual 8 Physical Description Side View Back View 1) Ethernet Connector Connects to the network and powe

www.acti.com Hardware Manual 9 Installation Procedures Mount the Camera 1. Attach the bracket to the camera. 2. Mark th