Acti KCM-7911 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kamerarekorder Acti KCM-7911 herunter. ACTi KCM-7911 User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 32
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
KCM-7911
H.264 4-Megapixel IP D/N PoE Outdoor
Hemispheric Camera with Advanced WDR
(DC 12V / PoE)
Ver. 2015/01/12
Seitenansicht 0
1 2 3 4 5 6 ... 31 32

Inhaltsverzeichnis

Seite 1 - KCM-7911

KCM-7911 H.264 4-Megapixel IP D/N PoE Outdoor Hemispheric Camera with Advanced WDR (DC 12V / PoE) Ver. 2015/0

Seite 2 - Table of Contents

www.acti.com Hardware Manual 10 Vertical Pole Mount Suitable when mounting the camera on a vertical pole. PMAX-0310

Seite 3 - Accessing the Camera 27

www.acti.com Hardware Manual 11 Installing the Camera on a Flat Surface This section covers the step-by-step procedures in directly

Seite 4 - Precautions

www.acti.com Hardware Manual 12 Step 2: Open the Camera Cover 1. Loosen the three (3) screws using the supplied hex wrench. 2. L

Seite 5 - Safety Instructions

www.acti.com Hardware Manual 13 Step 3: Prepare for Waterproof Installation The camera comes with two (2) glands used for waterproo

Seite 6 - Introduction

www.acti.com Hardware Manual 14 have rubber rings, please contact your local sales agents or our Customer Help Desk (CHD) for suppo

Seite 7 - Physical Description

www.acti.com Hardware Manual 15 Waterproof Solutions There are two ways to do the waterproof cabling installation:  Waterproof

Seite 8

www.acti.com Hardware Manual 16 3. Insert the sealing insert with claw. 4. Attach the cable gland body to the hole of the ca

Seite 9 - Installation Procedures

www.acti.com Hardware Manual 17 6. Insert the claw and rubber insert into the cable gland body and then attach the clamping nut to

Seite 10 - Hardware Manual

www.acti.com Hardware Manual 18 Waterproof Solution with Conduit This section describes the procedures to waterproof the cabling co

Seite 11 - Step 1: Drill the Holes

www.acti.com Hardware Manual 19 4. Insert the sealing rubber and attach it at the end of the flex conduit. 5. Attach the con

Seite 12

www.acti.com Hardware Manual 2 Table of Contents Precautions 4 Safety Instructions ...

Seite 13 - Rubber Ring

www.acti.com Hardware Manual 20 7. Insert the Ethernet cable and other cables (if any) through the conduit gland body.

Seite 14 - Step 6: Close the Cover

www.acti.com Hardware Manual 21 Other Connections This section describes the procedures in preparing the external devices that you

Seite 15 - Waterproof Solutions

www.acti.com Hardware Manual 22 3. Connect the wire with the white stripe to the 12V pin and the other to the GND pin. 4. Ti

Seite 16

www.acti.com Hardware Manual 23 Connecting DI/DO Devices (Optional) Depending on your surveillance needs, you may connect digital i

Seite 17

www.acti.com Hardware Manual 24 To connect output devices (DO), map the pins to one of the pin combinations below: Device Pin Map

Seite 18

www.acti.com Hardware Manual 25 Consequently, to connect a second DI or DO device, wire the connection to Pins 5 to 8. High Voltag

Seite 19

www.acti.com Hardware Manual 26 NOTE: For more information on DI/DO connections, please refer to the Knowledge Base article All abo

Seite 20

www.acti.com Hardware Manual 27 Accessing the Camera Configure the IP Addresses In order to be able to communicate with the camera

Seite 21 - Other Connections

www.acti.com Hardware Manual 28 When the left mouse is clicked on the camera model name, the default browser of the PC is automatic

Seite 22

www.acti.com Hardware Manual 29 Use the default IP address of the camera If there is no DHCP server in the given network, the user

Seite 23

www.acti.com Hardware Manual 3 Connecting DI/DO Devices (Optional) ... 23 Connecting Audio

Seite 24

www.acti.com Hardware Manual 30 Manually adjust the IP addresses of multiple cameras If there are more than one camera to be used i

Seite 25

www.acti.com Hardware Manual 31 Access the Camera Now that the camera and the PC both have their unique IP addresses and are under

Seite 26

www.acti.com Hardware Manual 32 Upon successful connection to the camera, the user interface called Web Configurator would appear t

Seite 27 - Accessing the Camera

www.acti.com Hardware Manual 4 Precautions Read these instructions You should read all the safety and operating instructions before

Seite 28

www.acti.com Hardware Manual 5 Safety Instructions Don’t use the power supply with other voltages This device is likely to be damag

Seite 29 - 192.168.0.100

www.acti.com Hardware Manual 6 Introduction Package Contents Camera Cable Gland Conduit Gland Hex Wrench Screw Plugs Screws for

Seite 30

www.acti.com Hardware Manual 7 Physical Description DC 12v Power Input Audio Input / Output Ethernet Port Digital Input

Seite 31 - Access the Camera

www.acti.com Hardware Manual 8 3) Reset Button The Reset button is used to restore the factory default settings of the camera, inc

Seite 32 - Password: 123456

www.acti.com Hardware Manual 9 Installation Procedures There are several mounting options that you can use to install the camera. S

Kommentare zu diesen Handbüchern

Keine Kommentare